Ergonomics

The 6° backsweep of the grip ends is currently regarded as the optimum angle for comfort. The 15 mm upsweep means you can always turn the handlebars to the best ergonomic position. The width of up to 850 mm enables constant control and smooth steering even in technically demanding areas. To achieve the superior stiffness of the lightweight carbon handlebars, we let the ø 31.8 mm clamping area extend as far as possible over 280 mm to the usual 22.2 mm grip ends, which is perfect for wide handlebars in particular. We have also added a few extra layers to this carbon riser to meet today’s enduro challenges. These sturdy carbon risers have proven themselves in enduro races all over the world.

Construction

Like all our products in the TLO series, our lightweight full carbon MTB risers are hand-wound (about carbon) from the best prepregs available on the market to suit your weight and riding style. The layer structure, which has been further refined over 30 years of production experience, with up to 25 layers in the heavily stressed centre section and only 6 layers in the less stressed grip area, enables the low weights despite the incredible stiffness and indestructibility required in enduro.

Ordering information

Our Enduro Carbon Lowrisers may only be shortened by up to 10 mm on each side. So make sure you order the right width for your requirements! Bar ends cannot be used on these lightweight carbon handlebars! If you are not sure whether you want to use bar ends, the SL-Lowriser, which has thicker bar ends, may be the better choice. Please note, however, that this lighter carbon rizer does not have the same stability as the carbon lowrizer, which is also designed for enduro use! These carbon handlebars can be supplemented with our customised carbon handlebar plugs.

Surface options

All our lightweight carbon MTB lowrizers are unpainted to avoid adding unnecessary weight and because the epoxy surface is much more resistant than any paint. It is therefore not scratched as quickly. All our lightweight carbon MTB risers come in the current matt look. Enduro risers can be ordered in 1k fabric or UD. 1k is the classic carbon look with biaxially woven fibres. With UD (unidirectional), all carbon fibres run in one direction. This gives the surface a uniform black, almost painted look. In general, UD carbon parts are a few grams heavier than 1K carbon parts. You can find out more about UD and 1k here.

Colour options

To create the perfect look on your bike, all Carbon Enduro Risers are available in 3 different logo colours: Schmolke Edition (red / white), Black Edition and White Edition.

Assembly Instruction for MTB Lowriser Enduro

Always use a torque tool for installation!